New dehumidifier with external condenser

Condair is launching the Condair DC-N, a condensing dehumidifier with an external condenser unit that can dry an area without the risk of overheating.

Traditional condensing dehumidifiers introduce heat to a room from their built-in condensers when they dry the air. The Condair DC-N’s external condenser allows the heat generated during drying to be remotely exhausted, similar to a split air conditioner. This makes it much easier to manage the temperature of a room that is being dehumidified.

Dave Marshall-George, Sales Director at Condair commented, “Condensing dehumidifiers dry the air by creating a cold surface upon which moisture in the air condenses and drips to drain. This process generates heat, so the dry air leaving the dehumidifier can be several degrees warmer than the humid air entering it. For some projects, this added heat can cause an issue. When it is, ventilation is frequently used to control temperature. However, by introducing fresh air to control temperature, moisture can enter the room, making the humidity control less effective.

“The Condair DC-N is the ideal solution in these circumstances. When the room is cold and below the required temperature, the dehumidifier’s on-board condenser introduces heat as well as drying the air. Then when the room’s temperature set point is reached, the remote condenser activates, ejecting the heat externally rather than into the room. This allows a room to remain sealed, therefore providing efficient drying, whilst achieving the ideal internal temperature and humidity.”

The Condair DC-N range offers drying capacities from 263 to 940 litres per day (@30°C/80%RH). It incorporates energy efficient EC fans, high quality components and R410A refrigerant gas. Operation is controlled via an on-board digital display, an optional remotely located controller (up to 50m away) or via BMS using Modbus.

Condair offers a comprehensive range of both condensing and desiccant dehumidifiers, allowing the company to always provide the most appropriate technology for any drying project. The Condair Group is the world’s leading specialist in humidity control and evaporative cooling, with energy efficient, hygienic and innovative technologies for commercial, industrial and heritage applications. Condair is represented in the UK by Condair Ltd, which offers system design, manufacture, supply, installation, commissioning, maintenance and spares. You can find out more by visiting the company’s website at www.condair.co.uk

You might also like